Cupric Sulfate Anhydrous,CAS : 7758-98-7

E FORU specializes in producing high purity Cupric Sulfate Anhydrous,CAS : 7758-98-7 with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N. 99.99995% (6N5), and in some cases up to 99.99999% (7N) and 99.999999% (8N),Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas.Production of metallic carbide materials including , cobalt Sulfate, chromium Sulfate, hafnium Sulfate, molybdenum Sulfate, niobium Sulfate, tantalum Sulfate, titanium Sulfate, vanadium Sulfate, zirconium Sulfate, Barium sulfate,calcium sulfate,ferrous sulfate, and white vitriol is zinc sulfate,and numerous others.Sulfates are chemical compounds containing the sulfate anion, (SO42-). Sulfates are salts or esters of sulfuric acid, H2SO76, formed by replacing one or both of the hydrogen atoms with a metal cation or organic group. Most metal sulfates are readily soluble in water, but calcium sulfate is only slightly soluble, while barium, lead, and strontium sulfates are insoluble. Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.