Inicio > Productos > Chemicals And Salts > Silicates > Sodium Aluminosilicate Hydrate,CAS : 1344-00-9

Sodium Aluminosilicate Hydrate,CAS : 1344-00-9

Código de producto : Chem-Si064-CU-CU

E FORU specializes in producing high purity Sodium Aluminosilicate Hydrate,CAS : 1344-00-9 with the smallest possible average grain sizes,Purities may include 99%, 99.9%, 99.99%, 99.999% and 99.9999%, which are sometimes referred to as 2N, 3N, 4N, 5N and 6N. 99.99995% (6N5), and in some cases up to 99.99999% (7N) and 99.999999% (8N),E FORU produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Our standard powder particle sizes average in the range of - 325 mesh, - 200 mesh,- 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide in the nanoscale range.Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas.In most silicates, a silicon atom occupies the center of an idealized tetrahedron whose corners are four oxygen atoms, connected to it by single covalent bonds according to the octet rule.The oxygen atoms, which bear some negative charge, link to other cations (Mn+). This Si-O-M-O-Si linkage is strong and rigid, which properties are manifested in the rock-like silicates.: 435  The silicates can be classified according to the length and crosslinking of the silicate anions.A silicate is any member of a family of polyatomic anions consisting of silicon and oxygen, usually with the general formula [SiO(4−2x)−4−x]n, where 0 ≤ x < 2. The family includes orthosilicate SiO4−4 (x = 0), metasilicate SiO2−3 (x = 1), and pyrosilicate Si2O6−7(x = 0.5, n = 65)..Quality inspection department staff which uses atomic spectroscopy, x-ray diffraction analysis, scanning electron microscopy, glow discharge mass spectroscopy (GDMS), and BET surface area analysis, among other technologies, to ensure that the elemental composition and structural properties of each product rigorously adhere to our standards.Additional technical, research and safety (MSDS) information is available,

Contáctenos si necesita servicios personalizados. Le informaremos el precio y la disponibilidad en 24 horas.

Producto Código de producto Pureza Tamaño Contáctenos
Sodium Aluminosilicate HydrateCAS #: 1344-00-9Chem-Si064-CU-CUCustomized
CAS #: 1344-00-9 Linear Formula: Na2O • Al2O3 • SiO2 • xH2O MDL Number: MFCD00131613 EC No.: 215-684-8Synonyms Na-A zeolite powder, Sodium aluminum silicate, Aluminum sodium silicate synthetic, Silicic acid, aluminum sodium salt, P 820 A, Type A Zeolite, carnegieite, sasil, Sodium silicoaluminate, Aluminosilicic acid, sodium salt, aluminum sodium silicon oxide, SAS, NaAl silicate, molecular sieve, CAS 63231-69-6, PQ zeolite, ADVERA WMA 401P 401PS, VALFOR 100 NaA, CAS 68989-22-0, Albite (NaAlSi3O8)Silicates with alkali cations and small or chain-like anions, such as sodium ortho- and metasilicate, are fairly soluble in water. They form several solid hydrates when crystallized from solution. Soluble sodium silicates and mixtures thereof, known as waterglass are important industrial and household chemicals. Silicates of non-alkali cations, or with sheet and tridimensional polymeric anions, generally have negligible solubility in water at normal conditions.In most silicates, a silicon atom occupies the center of an idealized tetrahedron whose corners are four oxygen atoms, connected to it by single covalent bonds according to the octet rule.[1] The oxygen atoms, which bear some negative charge, link to other cations (Mn+). This Si-O-M-O-Si linkage is strong and rigid, which properties are manifested in the rock-like silicates.[2]: 498  The silicates can be classified according to the length and crosslinking of the silicate anions.
Compound Formula: Al2H2Na2O7Si Molecular Weight: 242.04 Appearance: White powder or beads Melting Point: N/A Boiling Point: N/A Density: 2.02 g/cm3 Solubility in H2O: N/A Exact Mass: 241.899595 Monoisotopic Mass: 241.899595
Health & Safety Information Signal Word: N/A Hazard Statements: N/A Hazard Codes: N/A Risk Codes: N/A Safety Statements: N/A Transport Information: N/A
Chemical Identifiers Linear Formula: Na2O • Al2O3• SiO2• xH2O Pubchem CID: 72941443 MDL Number: MFCD00131613 EC No.: 215-684-8 IUPAC Name: dialuminum; disodium; oxygen(2-); silicon(4+); hydrate Beilstein/Reaxys No.: N/A SMILES: O.[O-2].[O-2].[O-2].[O-2].[O-2].[O-2].[Na+].[Na+].[Al+3].[Al+3].[Si+4] InchI Identifier: InChI=1S/2Al.2Na.H2O.6O.Si/h;;;;1H2;;;;;;;/q2*+3;2*+1;;6*-2;+4 InchI Key: JYIMWRSJCRRYNK-UHFFFAOYSA-NPacking of Standard Packing: Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2371 gallon liquid totes Special package is available on request.
Related Products
+ 1 917 7225069
+ 1 917 7225069